×
Well done. You've clicked the tower. This would actually achieve something if you had logged in first. Use the key for that. The name takes you home. This is where all the applicables sit. And you can't apply any changes to my site unless you are logged in.

Our policy is best summarized as "we don't care about _you_, we care about _them_", no emails, so no forgetting your password. You have no rights. It's like you don't even exist. If you publish material, I reserve the right to remove it, or use it myself.

Don't impersonate. Don't name someone involuntarily. You can lose everything if you cross the line, and no, I won't cancel your automatic payments first, so you'll have to do it the hard way. See how serious this sounds? That's how serious you're meant to take these.

×
Register


Required. 150 characters or fewer. Letters, digits and @/./+/-/_ only.
  • Your password can’t be too similar to your other personal information.
  • Your password must contain at least 8 characters.
  • Your password can’t be a commonly used password.
  • Your password can’t be entirely numeric.
Enter the same password as before, for verification.
Login

Grow A Dic
Define A Word
Make Space
Set Task
Mark Post
Apply Votestyle
Create Votes
(From: saved spaces)
Exclude Votes
Apply Dic
Exclude Dic

Self-Adjusting Prescribed Performance Control for Nonlinear Systems with Input Saturation

Click here to flash read.

arXiv:2404.13714v1 Announce Type: new
Abstract: Among the existing works on enhancing system performance via prescribed performance functions (PPFs), the decay rates of PPFs need to be predetermined by the designer, directly affecting the convergence time of the closed-loop system. However, if only considering accelerating the system convergence by selecting a big decay rate of the performance function, it may lead to the severe consequence of closed-loop system failure when considering the prevalent actuator saturation in practical scenarios. To address this issue, this work proposes a control scheme that can flexibly self-adjust the convergence rates of the performance functions (PFs), aiming to achieve faster steady-state convergence while avoiding the risk of error violation beyond the PFs' envelopes, which may arise from input saturation and improper decay rate selection in traditional prescribed performance control (PPC) methods. Specifically, a performance index function (PIF) is introduced as a reference criterion, based on which the self-adjusting rates of the PFs are designed for different cases, exhibiting the following appealing features: 1) It can eliminate the need to prespecify the initial values of the PFs. In addition, it can also accommodate arbitrary magnitudes of initial errors while avoiding excessive initial control efforts. 2) Considering actuator saturation, this method can not only reduce the decay rates of the PFs when necessary to avoid violation of the PFs, but also increase the decay rates to accelerate system convergence when there is remaining control capacity. Finally, several numerical simulations are conducted to confirm the effectiveness and superiority of the proposed method.

Click here to read this post out
ID: 817754; Unique Viewers: 0
Unique Voters: 0
Total Votes: 0
Votes:
Latest Change: April 23, 2024, 7:32 a.m. Changes:
/u/anonymous
Dictionaries:
Words:
Spaces:
Views: 8
CC:
No creative common's license
Comments: